hellpop Posted January 22, 2014 Posted January 22, 2014 I like that as a running stand for the Flash (and presumably Quicksilver). Always wanted something like that. Quote
luke314pi Posted January 22, 2014 Author Posted January 22, 2014 It is pretty heavily counter-weighted too, so Flash could lean forward even more. Quote
ElGallo21 Posted January 22, 2014 Posted January 22, 2014 hmmm looks like it could maybe work as a vertical stand also. Quote
VulcansFury Posted January 22, 2014 Posted January 22, 2014 Luke, you could make Leonardo DaVinci weep with jealousy if he were alive. Nice work! Quote
Donny B Posted January 22, 2014 Posted January 22, 2014 beautiful! the perfect answer for all my 'running minimate' needs Quote
buttheadsmate Posted January 22, 2014 Posted January 22, 2014 (edited) Those look superb ....I'm thinking that the shape of the stand might be better if it mimicked the shape of Cap's/Flash's cowl wings ? -something like this although not so elaborate ? The character would attach to the left of the 'image' .......it would also help with counterbalance ? They're just great the way they are however Edited January 22, 2014 by buttheadsmate Quote
luke314pi Posted January 22, 2014 Author Posted January 22, 2014 I tried few other configurations, but my printer is very picky, and the others did not print correctly. Plus I wanted to minimize the amount of trimming and post processing. Quote
JediJohnson Posted January 22, 2014 Posted January 22, 2014 Luke, on the "puching" accessory you sent free with orders of the zemo wave, the edges were very rough. Do all of your accessories come out this way? thanks Quote
luke314pi Posted January 22, 2014 Author Posted January 22, 2014 Anything that isn't a block needs supports to hold it up during printing. So one side is always a little rough from where the supports used to be. I try to trim them until they are smooth. I'm sorry to hear yours was rough still. Quote
MrClean Posted January 22, 2014 Posted January 22, 2014 I would imagine clear paint (color appropriate to the specific character), applied in streaks to this would look fantastic. Nice work as usual! Quote
LordUnderfoot Posted January 22, 2014 Posted January 22, 2014 knowing you work very hard at this stuff.. I would like the force sphere thing a LOT more if the spheres where staggered a bit more instead of all three being the same distance from the hand. really nice efforts all around luke Quote
luke314pi Posted February 4, 2014 Author Posted February 4, 2014 I am almost ready to release our new set of 3D printed stands. Here are some pics of the Handstand Base: Quote
TM2 Dinobot Posted February 4, 2014 Posted February 4, 2014 Can I suggest a stand that works for wave 5> feet? There's a slight recess that you may be able to work with. I know it's a long shot, but I know I and possible some others would appreciate it. Quote
youbastards Posted February 4, 2014 Posted February 4, 2014 Yeah, a stand designed for the older mates would be cool. I would even be happy with something that just gripped the leg as long as the fit was snug enough to keep it in place. Quote
luke314pi Posted February 4, 2014 Author Posted February 4, 2014 I will add that to my to-do list. By the way, I forgot to mention that the idea for the Handstand Base came from Geohound. I asked him what kinds of fighting bases would help him with his TTFC comics, and this was his top want. Quote
TM2 Dinobot Posted February 4, 2014 Posted February 4, 2014 Or perhaps instead of a peg that sits up for the foot, make the stand a little recessed? Just something to keep them from falling over. Quote
Hawkeye's Junk Posted February 5, 2014 Posted February 5, 2014 wonderful idea! I will be buying some of those. Are you selling in a lot or just individually? Quote
kaipo Posted February 5, 2014 Posted February 5, 2014 Can I suggest a stand that works for wave 5> feet? There's a slight recess that you may be able to work with. I know it's a long shot, but I know I and possible some others would appreciate it. Yeah, a stand designed for the older mates would be cool. I would even be happy with something that just gripped the leg as long as the fit was snug enough to keep it in place. I will add that to my to-do list. By the way, I forgot to mention that the idea for the Handstand Base came from Geohound. I asked him what kinds of fighting bases would help him with his TTFC comics, and this was his top want. YES these stands for sure. I remember the debut of the "C3" feet and there were a few of us hoping for a special release of holey feet for our old figures. Quote
luke314pi Posted February 5, 2014 Author Posted February 5, 2014 wonderful idea! I will be buying some of those. Are you selling in a lot or just individually? There will be 3 new stands, possibly 4. Each will be available individually, or as a set at a discount. I will have more details soon. Quote
TM2 Dinobot Posted February 11, 2014 Posted February 11, 2014 (edited) Any chance of Father Mathias' staff? Edited February 11, 2014 by TM2 Dinobot Quote
luke314pi Posted February 12, 2014 Author Posted February 12, 2014 Possibly! I will add it to my list. Quote
luke314pi Posted February 12, 2014 Author Posted February 12, 2014 The rest of this series is now available! Here are the two stands I haven't shown here yet: Hand Propelled Flight Stands (this was my first print, but I had to make some tweaks to it over the past few months, and now it is ready) Super Tall Flight Stand These are available individually, or as a set of 4 at a discount. You can find them here: http://lukestoystore.com/3d-printed-accessories/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.