UA-100768763-1 Jump to content

Ugh, Red Skull missing paint!


RaginCajun713

Recommended Posts

I just picked up the Bring on the Bad Guys box set at my LCS today. I got home to realize that Red Skull is missing his nose!!!!!!! I would go back, but this was their last one, and they didn't give me a receipt since I used store credit. Ugh =(

Erm minimates don't have noses! - it's one of the hard and fast rules of minimates.

If you have issues though your best bet is to contact DST customer service, it's sometimes patchy on response times and right now they are probably swamped with Toy fair but will eventually get back to you.

T.

Link to comment
Share on other sites

Also, Dr. Doom's arms were reversed and all of them have 1 leg longer than the other =(((((((

I just picked up the Bring on the Bad Guys box set at my LCS today. I got home to realize that Red Skull is missing his nose!!!!!!! I would go back, but this was their last one, and they didn't give me a receipt since I used store credit. Ugh =(

Erm minimates don't have noses! - it's one of the hard and fast rules of minimates.

If you have issues though your best bet is to contact DST customer service, it's sometimes patchy on response times and right now they are probably swamped with Toy fair but will eventually get back to you.

T.

I contacted them a few days ago about my Bullseye from Wave 4. When I get a reply, if I get one from what I've seen on here, I'll tell them about this set. It just looks awkward, none of them stand straight and Red Skull has a white nose. Red Skull likes "candy" a little too much it seems.

Link to comment
Share on other sites

The problem with the legs is kind of universal to the brand so there is nothing that can really be done about that and as far as Wave 4 Bullseye goes there is likely nothing to be done about that because it was so long ago if an when they can help out it is usually only for newer stuff.

Link to comment
Share on other sites

The problem with the legs is kind of universal to the brand so there is nothing that can really be done about that and as far as Wave 4 Bullseye goes there is likely nothing to be done about that because it was so long ago if an when they can help out it is usually only for newer stuff.

I figured. The problem with the Bullseye is that the plastic for his legs are discolored and have a lot of residue from teh molding process. It's just annoying bc all my other Mates stand properly, for the most part. But now some of the guys from that set I have to have their legs wide open for them to stand =(. Given, I bought it only for the Dr. Doom, but he is one of the ones whose leg is almost half an inch longer =(. Well, I still have a few coming in the mail from ebay and TRU.com to look forward to.

Edited by RaginCajun713
Link to comment
Share on other sites

  • 1 month later...
The problem with the legs is kind of universal to the brand so there is nothing that can really be done about that and as far as Wave 4 Bullseye goes there is likely nothing to be done about that because it was so long ago if an when they can help out it is usually only for newer stuff.

I figured. The problem with the Bullseye is that the plastic for his legs are discolored and have a lot of residue from teh molding process. It's just annoying bc all my other Mates stand properly, for the most part. But now some of the guys from that set I have to have their legs wide open for them to stand =(. Given, I bought it only for the Dr. Doom, but he is one of the ones whose leg is almost half an inch longer =(. Well, I still have a few coming in the mail from ebay and TRU.com to look forward to.

Minimates are only 2 inches tall. 1/2 an inch would add a hell of a lot of height to one leg. I mean, a LOT.

Just sayin.

Link to comment
Share on other sites

  • 2 weeks later...
The problem with the legs is kind of universal to the brand so there is nothing that can really be done about that and as far as Wave 4 Bullseye goes there is likely nothing to be done about that because it was so long ago if an when they can help out it is usually only for newer stuff.

I figured. The problem with the Bullseye is that the plastic for his legs are discolored and have a lot of residue from teh molding process. It's just annoying bc all my other Mates stand properly, for the most part. But now some of the guys from that set I have to have their legs wide open for them to stand =(. Given, I bought it only for the Dr. Doom, but he is one of the ones whose leg is almost half an inch longer =(. Well, I still have a few coming in the mail from ebay and TRU.com to look forward to.

Minimates are only 2 inches tall. 1/2 an inch would add a hell of a lot of height to one leg. I mean, a LOT.

Just sayin.

Almost 25% more! :biggrin:

Link to comment
Share on other sites

One of the most endearing things about this place is, as its US orientated, you still talk about things in inches,pounds & gallons ......makes me feel young.

and me like i've not been born yet

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...