Donny B Posted November 7, 2018 1 minute ago, Freaqualizer said: For anyone that has this in hand, does that Ghost minimate have a hole in the top of the head for a hair piece? Yes, there’s a peg hole for the hood she comes with Share this post Link to post Share on other sites
Freaqualizer Posted November 7, 2018 Thank you @Donny B! Share this post Link to post Share on other sites
DSTZach Posted November 7, 2018 19 hours ago, stack32 said: It's too bad a pretty decent set of minimates is going to end up being so notable for what's not there. No unmasked head for Ghost is surprising. But... but we showed a photo of the set with unmasked heads for everyone EXCEPT her. So I thought that would be the least surprising thing. At no point was that even a suggested possibility. Unless you were surprised when we first showed it. And I'm sorry that Hank's face is printed on his helmet, but I'm hazy on how the blank head inside connects to Ghost. Regardless, clearly I need to stop discussing sets before they're out, as things can change. Share this post Link to post Share on other sites
buttheadsmate Posted November 7, 2018 (edited) On 11/6/2018 at 1:21 PM, buttheadsmate said: OK , so does the 'part' that fits over the blank head consist of a helmet & the ' red-visored' facial expression of Hank Pym depicted on the front of it ? So the answer to my question was "Yes". I'm happy with that . Edited November 7, 2018 by buttheadsmate Share this post Link to post Share on other sites
stack32 Posted November 7, 2018 45 minutes ago, DSTZach said: But... but we showed a photo of the set with unmasked heads for everyone EXCEPT her. So I thought that would be the least surprising thing. At no point was that even a suggested possibility. Unless you were surprised when we first showed it. I suppose I should clarify, I understood the figure was going to be released without an alternate head, I'm surprised and disappointed it would happen given the character spends as much time in the movie unmasked as masked. It's the kind of thing that's causing me to slowly lose interest in movie minimates. Share this post Link to post Share on other sites
ABC123 Posted November 8, 2018 (edited) 6 hours ago, DSTZach said: And I'm sorry that Hank's face is printed on his helmet, but I'm hazy on how the blank head inside connects to Ghost. I don’t know about anyone else, but for me I was disappointed that there was a unnecessary blank head piece inside the helmet for the Hank Pym minimate, and the Ghost minimate did not get a character head piece on top of her standard mask head piece. I hope that clears things up for you Zach. Edited November 8, 2018 by ABC123 Share this post Link to post Share on other sites
PrinceCuseCuse Posted November 8, 2018 I gotta say, despite not having an unmasked head (which is very important to me in all the figures/toys that I collect) Ghost is a fantastic Minimate overall! The deco is awesome. Share this post Link to post Share on other sites
Heinous Posted November 8, 2018 I thought the mate is a little too metallic. She seemed more flat white to me. Minor complaint, I still love the figure Share this post Link to post Share on other sites
stack32 Posted November 8, 2018 Now that I have these in hand I agree. The pearlescent plastic looks nice but doesn't seem to really match the movie. I also find it a little odd that the detail lines on Ghost are gray on the body but black on the head. Maybe it's an attempt to suggest phasing? I'm disappointed Hank's helmet doesn't have a transparent visor however it is consistent with Ant-Man and Wasp so I suppose it makes sense. The extra head inside is bizarre and also really difficult to remove. Wasp is good and comes with a much better flight stand than the recent Demogoblin. Ant-Man's chest is a notably different color than his arms and legs and it kind of ruins the figure for me, it's too bad since DST has really done a good job on this sort of thing in the last few releases. The feet all fit on the stands well and aren't the same mold as the wave 76 feet. Share this post Link to post Share on other sites
nandoninny Posted November 8, 2018 (edited) i don't mind the hank helmet with the blank head. i'm always worried about messing up the paint jobs or just getting the head stuck in there so this was a good solution. Edited November 8, 2018 by nandoninny Share this post Link to post Share on other sites
MisterPL Posted November 8, 2018 Helmets and masks with translucent or transparent visors should use translucent or transparent plastic over a tampo'd noggin. Share this post Link to post Share on other sites
DSTZach Posted November 8, 2018 20 hours ago, stack32 said: I suppose I should clarify, I understood the figure was going to be released without an alternate head, I'm surprised and disappointed it would happen given the character spends as much time in the movie unmasked as masked. It's the kind of thing that's causing me to slowly lose interest in movie minimates. Well, usually the movie isn't fully shot, let alone edited, when we design them, but disappointment noted. Share this post Link to post Share on other sites
buttheadsmate Posted November 8, 2018 2 hours ago, nandoninny said: i don't mind the hank helmet with the blank head. i'm always worried about messing up the paint jobs or just getting the head stuck in there so this was a good solution. I agree . Share this post Link to post Share on other sites
Heinous Posted November 8, 2018 The funny part is it's extremely hard to get that helmet off, but it slips on and off easily on the hank head Share this post Link to post Share on other sites
buttheadsmate Posted November 8, 2018 (edited) Why would you want to take it off? I'm genuinely not trying to be argumentative but I just don't understand why? Edited November 8, 2018 by buttheadsmate Share this post Link to post Share on other sites
MisterPL Posted November 8, 2018 I'd want to use it as a hand-held prop. It's kind of creepy displaying your Wasp Minimate with the face exposed but eyes still seen through the "clear" visor. Share this post Link to post Share on other sites
Heinous Posted November 8, 2018 34 minutes ago, buttheadsmate said: Why would you want to take it off? I'm genuinely not trying to be argumentative but I just don't understand why? Well it truly doesn't matter as hank will go straight to the fodder bin. No desire for the figure. But why wouldn't you want to take the helmet off? It's a toy, play with it Share this post Link to post Share on other sites
buttheadsmate Posted November 8, 2018 36 minutes ago, Heinous said: Well it truly doesn't matter as hank will go straight to the fodder bin. No desire for the figure. But why wouldn't you want to take the helmet off? It's a toy, play with it You're absolutely right of course . Share this post Link to post Share on other sites
TENIME_art Posted November 9, 2018 There isn't any room in my MCU Minimates display, and I don't have the box set yet, so the only Hope is from the first movie, so I decided to spice up my ML shelf instead: Share this post Link to post Share on other sites
thereasonsy Posted November 11, 2018 On 11/7/2018 at 1:40 PM, DSTZach said: But... but we showed a photo of the set with unmasked heads for everyone EXCEPT her. So I thought that would be the least surprising thing. At no point was that even a suggested possibility. Unless you were surprised when we first showed it. And I'm sorry that Hank's face is printed on his helmet, but I'm hazy on how the blank head inside connects to Ghost. Regardless, clearly I need to stop discussing sets before they're out, as things can change. It’s been a long time but if I remember correctly this figure was announced and shown before it was confirmed who was playing Ghost and the embargo on spoilers was still in effect so I just naively assumed you guys didn’t make one because you actually couldn’t due to the contracts. Or maybe I just rationalized it. Either way a storm blue eyes head from GSX and black hair and this is done. Share this post Link to post Share on other sites
DSTZach Posted November 12, 2018 9 hours ago, thereasonsy said: It’s been a long time but if I remember correctly this figure was announced and shown before it was confirmed who was playing Ghost and the embargo on spoilers was still in effect so I just naively assumed you guys didn’t make one because you actually couldn’t due to the contracts. Or maybe I just rationalized it. Either way a storm blue eyes head from GSX and black hair and this is done. True, we weren't even able to show Hank in the suit when we solicited it, and he was a returning character. It's very possible we were not given reference on Ghost Unmasked when we started working on them. Which believe it or not was a very long time ago. Share this post Link to post Share on other sites